SUS304 Factory Direct Sale BLDC Motor Acrylic Wing Automatic Flap Turnstile
Product description
Flap barrier, also known as flap turnstile, is one type of the access management equipment, mainly used for
pedestrian access management,with the fast opening safe and convenient characteristics, is the ideal pedestrian
high frequency access mangment equipment,organically integrating machinery electronics microprocessor control,
and all kinds of different reading and writing equipment. Through figuring all kinds of different reading and writing
equipment,and adopting reliable performance safety protection devices real-time alarm system, and direction indicator
interface, realizing the access intelligent control and management by the mutual coordination .
Advantage of Sinomatic Flap Turnstile Gate
1. Flaps open when power off, and auto-close when power on.
2. Compatible with diverse access control devices.
3. Pedestrian flow directions can be single or double directions.
4. Available for two-way traffic lights, which can prompt the state---pass or no-entry.
MAIN FUNCTIONS AND FEATURES
1. Fault detection and alarm functions, easy to use and maintenance.
2. The running status can be programmed and controlled with the built-in keyboard on the main board.
3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working
automatically within the prescribed time and reset again after the default delay (till fully reset).
4. Anti-breakthrough function. The gate is locked automatically until opening signal received.
5. Synchronization functions (for dual gate equipment).
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),
the system will cancel the authority of the current user automatically.
7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed).
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function.
PRODUCT SPECIFICATIONS
| Model | SN-FB03 |
| Case Material | SS304(1.2mm) |
| Flap Material | Acrylic, Foam |
| Production Process | CNC Laser Cutting |
| Size | 1200*300*980mm(Customization acceptable) |
| Power input | AC100-240V,50/60HZ |
| Operation voltage | DC24V, 3A, Power: 40W |
| Electromagentic | Duty Cycle 100% |
| Barrier Arm Length | 260mm |
| Passage Width | 600mm |
| Passage direction | Single directional/Bi-directional(Optional) |
| Operating time | 1S |
| Throughput Rate | 25-30 persons/minute(Normally Closed) or 40 persons/(Normally Open) |
| IP grade | IP44 |
| MCBF | 5,000,000 Cycles |
Product Tags:
|
|
BLDC Motor Acrylic Wing Automatic Flap Turnstile SUS304 Retractable Images
|
