Security Full Height Sliding Wing Access Control Barriers with Automatic Sensor
PRODUCT DESCRIPTION
1. Faster pass speed and better performance for anti-trailing.
2. The design of connecting rod - run smoothly without noise.
3. Anti-climb, anti-creeper, strict management and higher grade appearance which offering graceful passage.
4. Infrared anti pinch design and dormancy function when barrier is blocked to achieve a more safe passage.
5. Sound and light alarm, including illegal intrusion, enter from wrong direction, trailing and overdue passing etc.
6. Gate auto open when power is off to meet the fire protection requirements.
TECHNICIAL SPECIFICATIONS
| Product Name | Automatic Access Control Sliding Turnstile Gate |
| Model No. | SN-SLB01 |
| Cabinet Material | 304 Stainless Steel |
| Dimensions | Cabinet:1200*330*980mm |
| Motor Type | Single motor |
| Weight | About 70KG |
| Arm Length | 270mm |
| Passage Width | 550-600mm |
| Dry Contact | 12V |
| Material Thickness | 1.5mm |
| Card-reading Window | Two |
| Direction | Bi-directional |
| Service Life | At least 5 million times |
| Operating Temperature | -25℃ ~ +60℃ |
| Related Humidity | ≥90%RH |
| Communication Interface | TCP/IP |
| Power Supply | AC100V~240V |
| Passing speed (NC) | 25-30 persons per minute |
| Passing speed (NO) | 30-35 persons per minute |
PRODUCT FUNCTION AND FEATURES
1. Problem-self-checking function.
2. Many options of working ways: Bi-direction card reading; One direction card reading and another no reading;
One direction card reading and another freely. And single direction photocell controlled passing and close. Working
ways can be set in the control panel.
3. When power off, arm open automatically and power on again, arm will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can be set in the
control panel.
5. Auto-reposition function: After card read, passenger not pass within regulated time period, full-height turnstile
will cancel this passing right. And the regulated time period for passing can be set by managers.
6. If passenger pass without card read or valid card read, flap barrier will alarm untill passenger get back from the
Swing barrier and then take a valid card to be read for passing.
7. Direction display to guide passenger which direction is to go.
8. Anti-rush function: If there is no open signal, arm will be holding tightly.
9. Double anti-clipping function: Photocell anti-clipping and mechanical anti-clipping. When passenger is going through
the sliding barrier, photocell will detect out this situation and will not close. After passenger passed, arm will close
automatically. During its reposition, if arm meets any obstacle, arm will get back automatcially or stop working for a
while with very slight force. Also it will alarm.
10. Swing barrier is with standard electrical interface for the integration of various readers and writers.
Product Tags:
|
|
BLDC Motor Access Control Barriers AC100V Full Height 270mm Arm Images
|
