Anti-Pinch Function Face Recognition And Temperature Check Intelligent Logic Judgement Sliding Turnstile Gate
High lights of our products
The body is made from brushed stainless steel which creates a seamless and elegant access point to
blend into most indoor environment.
It can be integrated with any kind of access controller system (e.g.: RFID device, Push button, Fingerprint
and Biometric device).
In case of emergency, the Optical Turnstile arm will open automatically to allow free passage.
Optical Turnstiles are suit for elegant and luxury entrance solutions.
1. Faster pass speed and better performance for anti-trailing.
2. The design of the structure - run smoothly without noise.
3. Anti-climb, anti-creeper, strict management and higher grade appearance which offering graceful passage.
4. Infrared anti pinch design and dormancy function when barrier is blocked to achieve a more safe passage.
5. Sound and light alarm, including illegal intrusion, enter from wrong direction, trailing and overdue passing etc.
6. Gate auto open when power is off to meet the fire protection requirements.
PRODUCT FUNCTION AND FEATURES
1. Fault detection and alarm functions, easy to use and maintenance
2. The running status can be programmed and controlled with the built-in keyboard on the main board
3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working
automatically within the prescribed time and reset again after the default delay (till fully reset)
4. Anti-breakthrough function. The gate is locked automatically until opening signal received
5. Support infrared photocell for anti-pinch and reset function
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),
the system will cancel the authority of the current user automatically
7. Gate can be set as normally open or normally closed
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller
needed)
9. Direction can be set as single-direction or bi-direction
10. LED direction indicator
11. Gate auto opens when power off and auto close when power on
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
PRODUCT SPECIFICATIONS
| Model | SN-SLB02 |
| Case Material | SS304, 1.2mm thickness |
| Production Process | CNC Laser Cutting |
| Size | 1200*330*980mm(Customization acceptable) |
| Power input | AC100-240V,50/60HZ |
| Operation voltage | DC24V, 3A, Power: 40W( Brushless Motor Optional) |
| Electromagentic | Duty Cycle 100% |
| Passage Width | 550mm |
| Flap height | 1400mm(default) |
| Flap Material | Acrylic |
| Passage direction | Single directional/Bi-directional |
| Operating time | 1S |
| Throughput Rate | 30-40 persons/minute(Normally Closed) or 40 persons/(Normally Open) |
| Reset Time after Power on | 3S |
| MCBF | 5,000,000 Cycles |
| Reset Time after failure | 10S |
| Automatic Reset Function | Automatically locked within set time(Time Adjustable) |
| Operation Humidity | 0~90%(No Freezing) |
| Operation Temperature | -20℃~+60℃ |
| Operation Eenvironment | Indoor,Outdoor(Shelter) |
| Protection Level | IP45 |
| Communication Interface | Standard RS485 interface, distance ≤1200 meters |
| Input Interface | Relay switch signal or 12V electrical level signal or 12V pulse signal of pulse width > 100ms, drive current >10mA |
FAQ
Q1: What’s advantage of the tripod turnstile gate between other supplier?
A: a. Use our own research PCB board, support audio prompt while gate open.
b. Mechanism is with our own design, inner space looks more neatly.
c. Use high quality electromagnet and selector sensor
Q2: What’s MOQ of turnstile gate?
A2: we support sample order test.
Q3: What’s the lead time for sample?
A3: For hot-sale model, we have stocks for sample order. Over 20pcs order, lead time is 5~7 working days
Q4: Does your turnstile gate support bar code, qr code reading?
A4: The turnstile gate is support integrate RFID, bar code, qr code, fingerprint, facial reader, and we can offer the
access control system with SDK for secondary development.
Q5: Do you accept OEM, ODM order? A5: Factory with CNC laser cutting machine, bending machine, we support
OEM order easily. And we also support the LED PCB board ODM logo service, it should be great help for your local
brand promotion.
Q6: Does your price including access control system? A7: Access control system is optional, standard price not
including access control system.
Q7: What is the payment option?
Accept payment via T/T (Bank transfer), Western Union, Money Gram etc.
Q: How long is your production time?
A: 5 working days for sample order; 10-15 working days for bulk order.
Q: What is the Shipping method and delivery time?
A: 20-30 days by sea to your nearest seaport. 2-5 days by air to your nearest airport. 3-5 days by express to your
doorstep. Delivery time usually takes 5-15 working days after we received your payment.
Product Tags:
|
|
Anti Pinch Sliding Turnstile Gate Face Recognition BLDC Motor 550mm Passage Images
|
